Lubrication device
Keywords:
Keywords:
Lubrication device
Category:
Tel:
Lubrication device
Product Description
For optimal lubrication, consider lubricating the rack or gear, preferably via the drive gear, allowing for more even grease distribution. The grease can be applied more evenly.
Most gear and rack transmission systems are exposed to air and prone to rust. Using the APEX APEX ’s PU (polyurethane) lubrication wheel ensures consistent and even grease application to the gear teeth.
PU The lubrication wheel uses an open polyurethane structure to absorb and store a small amount of grease.
The tooth profile uses a standard involute design for tight meshing with the gear or rack, applying the appropriate amount of grease without load.
Under prolonged working conditions, PU the lubrication wheel stores grease and automatically lubricates the transmission system as needed, preventing waste from over-lubrication or wear from insufficient lubrication.
To ensure immediate operation, PU pre-soak the lubrication wheel in grease.
Technical Parameters
External Dimensions (Width x Height x x Depth) 167 mm x 196 mm x 94 mm
Weight (excluding grease) 1780 g
Lubricant Quantity 400 cm3
Grease Type Grease can reach NLGI 1~3
Oil Pump Type Piston Pump
Output Pressure Max. 70 bar (1,000 psi)
Oil Output per Pulse 0.15 cm³ 3
Number of Oil Outlets Max. 4 Connectors (Various connectors supported)
Maximum Lubrication Points Max. 16 / 56
Oil Outlet Connection Type PA Hose
Operating Voltage 24 V DC
Operating Current Imax ≤ 500 mA
Control Cable Connector M16 x 1, 5-PIN
Protection Class IP65
Operating Temperature -25 º C ~ 70 º C
Control PLC Microelectronic Controller
Pressure Monitoring System Pressure Measurement
Oil Level Monitoring Reed Switch
Previous Page
Next Page
Previous Page
Single-motor powered turret
Next Page
Online Consultation
Please leave your contact information, our professionals will contact you as soon as possible!